To Next Page

To Previous Page

3-9

COMPONENT ACCESS

REMOVING THE OVEN LIGHT & SOCKET ASSEMBL

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect power before servicing the range.

Replace all panels before operating range.

Failure to do so can result in death or electrical

shock.

To replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from

socket.

4. Replace bulb and bulb cover by turning

clockwise.

5. Use a screwdriver and bend the clips on the oven

light socket away from the edges of the liner

hole, and pull the socket out of the liner.

NOTE: If it is too difficult to remove the socket

from the front of the oven, you will have to push

the socket out from the back of the unit.

5. Disconnect the wires from the socket terminals.

CAUTION

When you work on the electric range, be careful

when handling the sheet metal parts. Sharp

edges may be present, and you can cut yourself if

you are not careful.

CAUTION

Be careful not to scratch or chip the oven liner

paint when you remove the oven light socket in

the next step.

Glass cover & Bulb

Socket Clips

LG LRE30451ST Service Manual

Other manuals for LG LRE30451ST