Setting a supervisor password
A password protects your computer from unauthorized users. The factory
default setup does not have a password. A supervisor password
prevents unauthorized users from changing the system setup.
Start the BIOS Setup Utility.
Use arrow keys to select Set Supervisor Password under Security menu, and then
press Enter.
Note:
You can use a supervisor password to gain access and change items in the
BIOS Setup Utility, and select Power on Boot. We recommend to use a
user password if someone else has to use the computer.
If the following message appears, enter a new password and press Enter. A
password must be consisted of character A~Z and numbers 0~9, and have the
maximum length of 8.
If the following message appears, press Enter.
- 85 -
To Next Page
Loading...
