Press F10 to save the new settings.
If the following message appears, select Yes and press Enter to restart the computer.
Setting a user password
A user password is a secondary compared to a supervisor password. You must
set a supervisor password in order to set a power-on password.
Start the BIOS Setup Utility and use arrow keys to select Security menu.
Use arrow keys to select Set User Password and press Enter.
Note:
A power-on password gives limited access for changing the settings in the
BIOS Setup Utility compared to a supervisor password.
If the following message appears, enter a new password and then press Enter. A
password must be consisted of character A~Z and numbers 0~9, and have the
maximum length of 8.
- 86 -
To Next Page
Loading...
