20
PREPARATION
PREPARATION
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to
expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in a
position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor
and the stand body.
You can hurt your finger(s).
WARNING
<M2062A/M2262A/M2362A/M2762A><M197WAP/M227WAP/M237WAP>
To Next Page
Loading...
