61
SOUND CONTROL
If the SET is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
In AV, Component, RGB PC and HDMI mode, you can select output sound for the left and right loudspeak-
ers.
Select the sound output.
L+R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R : Audio signal from audio R input is sent to left and right loudspeakers.
When NICAM MONO is received, you can select NICAM MONO or MONO.
When NICAM STEREO is received, you can select NICAM STEREO or MONO.
If the stereo signal is weak, switch to MONO.
When NICAM DUAL is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II
or MONO.
1
2
3
NICAM RECEPTION
SPEAKER SOUND OUTPUT SELECTION
To Next Page
Loading...
