LG M227WAP

48
PICTURE CONTROL
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture
Reset” function for each Picture Mode.
Press the MENU button and then ▲ / ▼ button to
select the Picture menu.
Press the ► button and then ▲ / ▼ button to select
Advanced.
Press the ► button and then ▲ / ▼ button to select
Dynamic Contrast, Dynamic Colour, Noise Reduction,
Black Level, Film Mode or Colour Temperature.
Press the MENU button to move to the previous menu
screen.
1
2
3
4
▲▼◄► OK MENU
Picture Mode
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
• Advanced
Picture
▼
▲
1
▲▼◄► OK MENU
▲▼◄► OK MENU
Picture Mode
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
• Advanced
Dynamic Contrast
Dynamic Colour
Noise Reduction
Black Level
Film Mode
Colour Temperature
• Red 0
• Green 0
Picture
Advanced
▼
▼
Off
Low
High
• Advanced ►
Dynamic Contrast ►
3
2
To Set
▲
NOTE
!
?
!
?
■ At 1080i / p Dynamic Contrast, Dynamic Colour, Noise Reduction is not enable.