LG M227WAP

52
PICTURE CONTROL
PICTURE CONTROL
If the picture is not clear and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode when the signal exist : RGB PC
MANUAL CONFIGURE(Adjustment for screen Position)
Press the MENU button and then use ▲/▼ button to
select the Picture menu.
Press the ► button and then use ▲/▼ button to select
Screen.
Press the ► button and then use ▲/▼ button to select
Manual Config.
Press the ► button and then use ▲/▼ button to select
Phase, Clock, H-Position or V-Position.
(When the H-Position and V-Position be changed,
Value may differ from the aspect ratio.)
Press the ◄ / ► button to make appropriate adjust-
ments.
Press the MENU button to move to the previous menu
screen.
1
2
3
4
5
6
▲▼◄► OK MENU
Aspect Ratio
Picture Mode
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
Picture
▼
1
4 5
2
3
▲▼◄► OK MENU
▲▼◄► OK MENU
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
• Advanced
• Picture Reset
Screen
Auto config
Manual Config.
Reset
Picture
Screen
Screen ►
Manual Config. ►
To set
Phase 8
Clock 50
H-Position 50
V-Position 50
▲