51
PICTURE CONTROL
SCREEN SETUP
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not
correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will
be unstable for a few seconds while the auto configuration is in progress.
AUTO CONFIGURE (RGB [PC] mode only)
Press the MENU button and then use ▲/▼ button to
select the Picture menu.
Press the ► button and then use ▲/▼ button to select
Screen.
Press the ► button and then use ▲/▼ button to select
Auto Config.
Press the OK button
Press the MENU button to move to the previous menu
screen
1
2
3
4
5
▲▼◄► OK MENU
Aspect Ratio
Picture Mode
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
Picture
▼
1
4
2
3
▲▼◄► OK MENU
▲▼◄► OK MENU
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
• Tint 0
• Advanced
• Picture Reset
Screen
Auto config
Manual Config.
Reset
Picture
Screen
Screen ►
Auto Config. ►
To set
To Set
▲
To Next Page
Loading...
