Changing your Phone’s Settings 83
10
Changing your
Phone’s Settings
82 Changing your Phone’s Settings
Selecting Ringer Types for
Messages
To select a ringer type to alert you to
messages:
1. From the main menu, highlight Sounds
and press .
2. Highlight Ringer Type and press .
3. Highlight Messages and press .
4. Highlight Voicemail, Page/Text or
Browser and press .
5. Highlight a ringer type and press .
You will hear a preview of the ringer type
when you highlight it.
Selecting a Tone Length
Longer tone lengths may be better for tone
recognition when dialing voicemail or other
automated systems.
To select a tone length:
1. From the main menu, highlight Sounds
and press .
2. Highlight Tone Length and press .
3. Highlight Short or Long and press .
Tip:
You can use the
volume control keys
on the side of the
phone to adjust the
ringer volume in
Standby mode or
earpiece volume
during a call.
Tip:
You can also assign
ringer types to
Internal Phone Book
entries to identify
individual callers.
(See “Assigning an
ID Ringer to an
Internal Phone Book
Entry” on page 76.)
Adjusting the Ringer, Key Beep and
Earpiece Volume
To adjust the ringer or key beep volume:
1. From the main menu, highlight Sounds
and press .
2. Highlight Audio Volume and press .
3. Highlight Ringer,Key Beep or Earpiece
and press .
4. Highlight a volume setting and
press .
When the phone’s ringer is in vibrate mode
and attached to an accessory (Desktop
Charger, Hands-Free Car Kit, etc.), it uses the
Standard ringer type to alert you of
incoming calls, alarms or messages.
Selecting Ringer Types for
Voice Calls
To select a ringer type for voice calls so you
can tell what kind of call is coming in by the
ringer:
1. From the main menu, highlight Sounds
and press .
2. Highlight Ringer Type and press .
3. Highlight Voice Calls and press .
4. Highlight W/ caller ID, No caller ID or
Roaming and press .
5. Highlight a ringer type and press .
You will hear a preview of the ringer type
when you highlight it.
To Next Page
Loading...
