LG PREMTA201 - Page 46

46
Function
Product
Description Option
Air
Conditioner
Ventilation
Air Supply ESP
○
A function to determine the air volume
value falling under the air supply
volume.
Set the RPM value for each fan speed.
Air Exhaust
ESP
○
A function to determine the air volume
value falling under the exhaust air
volume.
Set the RPM value for each fan speed.
Product
Direction
○
A function to set the installation
direction of the ventilation indoor unit.
Normal / Opposite
Express
Ventilation
Priority
○
A function to set the priority of air
supply and air exhaust in case of fast
ventilation operation.
Air supply / Air exhaust
Hum. Of Stand-
alone Vent.
Mode
○
A function to set whether to use the
humidication function in case of
ventilation single operation of direct-
type ventilation.
ON / OFF
Hum. Of Vent.
With Heating
Oper.
○
A function to automatically or manually
set the heating humidication function
of the direct-type ventilation.
Auto / Manual
Vent. Fan
Speed
Alignment
○
A function to change the reference air
volume of ventilation.
Default value / Rise by 10% / Fall by 10% /
Fall by 20%
Filter Check
Alarm
A function to set the lter replacement
cycle of the ventilation indoor unit.
Stage 0-Stage 5
Noise Target
Control
○
Outdoor unit noise limit
Limit the outdoor unit compressor
maximum frquency.
Setting value: ON / OFF
Decibel(db): 50 / 55 / 60 / 65 / 70
• The range of noise limits may vary
depending on the version of the
remote controller and the connected
product.