45
Function
Product
Description Option
Air
Conditioner
Ventilation
FAN Operation
Time
○
A function to display the operation
cumulative time of the indoor unit fan
motor.
-
IDU Operation
Time
○
A feature that displays the cumulative
time that the indoor unit has been on.
-
Indoor
Temperature
Master / Slave
○
A feature that sets the Master / Slave
for the temperature sensors for each
indoor unit.
• Cancel: Cancel the function.
• Master: Set based on the room
temperature.
• Slave: Use the reference temperature of
the master indoor unit.
※ When it is set to Slave, you can set the
Master indoor unit address (00-FF).
Indoor Unit
Physical
Address
○
Set the physical address of the indoor
unit.
-
Heating By
Sensing Floor
Temperature
○
This function sets whether to use the
oor temperature detection sensor.
ON / OFF
Auto ESP
○
This function can be used for changing
the target air volume.
Disabled / +10% / -10%
Fan Setting
During Thermal
Off
(Occupancy /
Operation
Mode)
○
This function automatically sets the
rotary speed of the fan in accordance
with each stage of the rated air volume
for making it easy to install.
-
UVnano
○ ○
This function sets whether or not UV
LEDs are installed in order to use the
UVnano function.
Installed / Not installed
Filter Box
○
A function to set whether to install for
using the function of lter box.
Installed / Not installed
Password
Initialization
○ ○
A function to reset the password
(0000) when the password set on the
remote controller is not remembered.
-
Factory Data
Reset
○ ○
A function to reset all the settings,
timer, schedule, and energy
information stored in the remote
controller.
-
To Next Page
Loading...
