LGMG North America Inc.
Operation and Safety Manual
36
“The platform handle is not in the middle position” error during start
The speed is reduced to the speed
after lifting
Lifting error of lifting coil
Lifting error of lowering coil
Brake coil error (because the brake coil is optional, this function is
temporarily shielded)
Stop lifting and running(Triplat only)
Electric drive motor controller current sensor error (overheating of
running or lifting motor)
Motor controller hardware damage error
Motor controller motor output error
Motor controller SRO error
Motor controller throttle valve error
Motor controller emergency reverse error
Motor controller HPD error
High neutral current (MC is detecting current in the motor, but there
shall be no current in this case)
The steering input is beyond the range (the improper voltage is in the
steering input)
Motor controller main contactor error
Motor controller overvoltage error
Motor controller heat reduction error
Motor controller motor error
Motor controller pump motor error
Motor controller left drive motor error
Motor controller right drive motor error
Triplat prohibits lifting and walking
combiacx shows only alarms
Pump motor short circuit error
Triplat show only alarms combiacx
prohibits lifting and walking
Left drive motor short circuit error
Alarm of exceeding 80% load
Right drive motor short circuit error