vii
Section 7. Troubleshooting
Instrument issues 7-1
Instrument will not power on 7-1
Instrument will not seal on a leaf 7-1
Instrument will not automatically log a measurement 7-2
The display layout is blank 7-2
Software warning when connecting the LI-600 7-3
Software warning when updating the firmware 7-4
The new RH sensor serial number has not updated 7-4
The RH values and sample RH are high 7-5
Instrument warnings 7-5
Matching. Do not clamp on leaf. 7-5
Low memory 7-5
Low battery 7-6
Blower off 7-6
Pump 7-6
No GPS map pin 7-6
Data download errors 7-7
Section 8. Maintenance
Storing the LI-600 8-1
External Cleaning 8-1
Barcode window and quantum sensor 8-1
Clamp and gasket 8-2
IRT sensor 8-3
Fluorometer 8-4
Internal Cleaning 8-5
Removing the instrument head shells 8-5
Cleaning the RH sensors 8-6
Removing and inserting a battery 8-7
Replacing the air intake filter 8-8
Calibrating the sensors 8-9
RH sensors 8-10
Flow sensors 8-18
To Next Page
Loading...
