Fluorescence detector 8-19
Changing the RH sensors serial number 8-19
Section 9. Theory of operation
Leaf porometer 9-1
Derivation of equations 9-2
Boundary layer conductance 9-5
Water vapor sensors 9-5
Flow sensors 9-7
Leaf temperature sensor 9-8
PAR sensor 9-8
Vapor pressure deficit 9-9
Leak rate 9-9
Stability criteria 9-9
User calibration procedures 9-10
Fluorometer 9-12
Maximum fluorescence and saturating flashes 9-13
Minimum and steady-state fluorescence 9-14
Fluorescence output parameters 9-15
Leaf angle and GPS 9-16
Accelerometer/Magnetometer 9-17
GPS 9-18
Leaf angle software calculations 9-18
Clocks 9-20
References 9-21
Section 10. Specifications
General 10-1
Porometer 10-2
Fluorometer 10-3
GPS Receiver 10-3
viii