-13- v2.9
Notes
12º - Connect the ECG Electrodes to the ECG sensor cables before placing them in the user body.
13º - The ECG signals need to be measured with the user lained back on the bed or stretcher.
14º - In order to keep the MySignals enclosure clean and without any mark we recommend to place it inside the
plastic bag and put the chamois cloth provided or any other protector desired on top of it before closing the bag.
15º - In case you placed MySignals into the kit without the protection and got it maked in black use a common nail-
varnish remover (with no acetone on it) along with a rag to clean it.
To Next Page
Loading...
