Libelium MySignals SW - Page 233

-233- v2.9
Sensors
KEY SPECIFICATIONS
• Measurement method: Oscillometric system
• Measuring range: Pressure 0-300 mmHg
• Pulse 30~200 p/min
• Measuring accuracy: Pressure ≤ ±3 mmHg
• Pulse ≤ 5%
• Operating environment: Temperature 10-40ºC
• Relative humidity ≤ 80%
The sensor works with internal rechargeable battery. Use the Blood pressure specic cable in order to charge the
sensor connected to MySignals.
Figure: Blood Pressure sensor with charger cable connected
Measurement:
Parameter Unit Range
Systolic pressure mm Hg 0-300 mm Hg
Diastolic pressure mm Hg 0-300 mm Hg
Pulse ppm 30-200ppm