Liebert CRV+ Series User Manual

24 Chapter 3 Electrical Installation
Liebert CRV+ Series Air Conditioner User Manual
3.3 Installation Inspection
After the electrical installation is completed, you should confirm the items listed in Table 3-2.
Table 3-2 Installation inspection
Check item Result
The power voltage is the same as the rated voltage on the unit nameplate
No open-circuit or short-circuit in the electrical connection exists
The power cables and earth cables connected to the disconnect switch, indoor unit
and outdoor unit are connected properly
The circuit breakers or fuses have proper ratings for equipment installed (refer to
the current listed in Table 3-1 for selecting apporopriate circuit breakers or fuses)
The control connections are completed properly
All wiring and connector connections are tight. The fixing bolts are tight
After confirming the preceding points, you can start the commissioning operation.

Liebert CRV+ Series Specifications

General

Refrigerant	R410A
Frequency	50/60 Hz
Operating Ambient Temperature	64° to 113°F (18° to 45°C)
Sound Pressure Level	Varies by model (typically 45 dB(A) to 65 dB(A))
Dimensions	Varies by model (consult specific model documentation)
Weight	Varies by model (consult specific model documentation)