42
EVOS
®
FL and EVOS
®
FL Color User Guide
Mechanical Issues
Problem Possible Solutions
LED light cube selection lever does
not move
• NEVER force lever!
• Remove LED light cube lock and replace with light cube
access cover (see page 37).
Mechanical stage does not move
• Remove stage lock pin.
• Check stage brakes (on the stage knobs) and loosen as needed.
Vessel does not sit securely on moving
stage
• Use the correct vessel holder for the application (refer to the
EVOS
®
Vessel Holders spec sheet, included on the USB flash
drive).
Mechanical stage drifts during time
lapse sessions
• Tighten the stage brakes (on the stage knobs) securely before
starting a time lapse session.
Mechanical stage tension is loose
• Tighten the stage brakes (on the stage knobs) as desired to
increase tension.
To Next Page
Loading...
