Lifeloc FC20 - Setting the Time

Page 20
User Settings
THE SETTINGS SCREEN
1. CHANGING THE TIME
From the “Settings” display, press the Execute but-
ton. The display will now read “Time” with the
hours digits flashing.
Press the + or – buttons to change the hour.
Press the Execute button to move to minutes.
Press the + or- buttons to change the minutes.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Press the Function button repeatedly until display
reads “SETTINGS”.
Press the Execute button once.
Pressing the Function button repeatedly scrolls you
through the FC20 user settings.
Page 20
User Settings
THE SETTINGS SCREEN
1. CHANGING THE TIME
From the “Settings” display, press the Execute but-
ton. The display will now read “Time” with the
hours digits flashing.
Press the + or – buttons to change the hour.
Press the Execute button to move to minutes.
Press the + or- buttons to change the minutes.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Press the Function button repeatedly until display
reads “SETTINGS”.
Press the Execute button once.
Pressing the Function button repeatedly scrolls you
through the FC20 user settings.