Lifeloc FC20 - Setting the Shutoff Time

Page 22
3. AUTOMATIC AIR BLANK (OPTION)
Auto Air Blank is a factory option available on the
FC20.
If you have this option installed, refer to page 34
of this manual for instructions on set-up and use.
User Settings
4. SETTING THE AUTO SHUTOFF TIME
From the “Settings” display, press the Execute but-
ton.
Press the Function button until the display reads
“Shutoff Time”.
Press the + or - buttons to adjust the shutoff time
between 1-15 minutes or disable auto shutoff by
selecting “0”.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Page 22
3. AUTOMATIC AIR BLANK (OPTION)
Auto Air Blank is a factory option available on the
FC20.
If you have this option installed, refer to page 34
of this manual for instructions on set-up and use.
User Settings
4. SETTING THE AUTO SHUTOFF TIME
From the “Settings” display, press the Execute but-
ton.
Press the Function button until the display reads
“Shutoff Time”.
Press the + or - buttons to adjust the shutoff time
between 1-15 minutes or disable auto shutoff by
selecting “0”.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.