Lifeloc FC20 - Print Settings Explained; Setting Number of Copies Printed

Page 26
User Settings
7. NUMBER OF COPIES PRINTED
7. PRINT SETTINGS EXPLAINED
The FC20 settings allow you to customize your
printout to your particular needs. You can choose
between the following:
Number of Copies, choose to print 1, 2 or 3 cop-
ies of a test when you print.
Print Format, choose to include or not to include
the calibration and calibration check information
with every printout by selecting the long or short
format.
Printer, select between the AP890, DataTrak, or
Other to print your results.
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Number of Copies”.
Press the + or- buttons to change the number of
copies printed to 1, 2 or 3.
Press the Function button to move to the next set-
ting or repeatedly until the display reads Exit.
Press the Execute button to save the changes and
return to the testing mode.
Page 26
User Settings
7. NUMBER OF COPIES PRINTED
7. PRINT SETTINGS EXPLAINED
The FC20 settings allow you to customize your
printout to your particular needs. You can choose
between the following:
Number of Copies, choose to print 1, 2 or 3 cop-
ies of a test when you print.
Print Format, choose to include or not to include
the calibration and calibration check information
with every printout by selecting the long or short
format.
Printer, select between the AP890, DataTrak, or
Other to print your results.
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Number of Copies”.
Press the + or- buttons to change the number of
copies printed to 1, 2 or 3.
Press the Function button to move to the next set-
ting or repeatedly until the display reads Exit.
Press the Execute button to save the changes and
return to the testing mode.