EasyManua.ls Logo

Lifeloc FC20 - Setting Pass and Fail Levels

Default Icon
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 31
User Settings
8. SETTING RESULTS FORMAT (PASS/WARN/FAIL)
Press the Function button till the display reads “Fail
Level”.
Press + or – button to set the BAC Fail level (eg.,
.040).
Press the Function button until the display reads
“Exit”. Press the Execute button to save and return
to the testing mode.
NOTE: You cannot set the PASS level higher than
the FAIL level.
An alcohol reading higher than the PASS level and
lower than the FAIL level will read WARN.
Page 31
User Settings
8. SETTING RESULTS FORMAT (PASS/WARN/FAIL)
Press the Function button till the display reads “Fail
Level”.
Press + or – button to set the BAC Fail level (eg.,
.040).
Press the Function button until the display reads
“Exit”. Press the Execute button to save and return
to the testing mode.
NOTE: You cannot set the PASS level higher than
the FAIL level.
An alcohol reading higher than the PASS level and
lower than the FAIL level will read WARN.

Table of Contents

Related product manuals