Lifeloc FC20 - Factory Options; Password Protection

Page 32
User Settings-Factory Options
PASSWORD PROTECTION EXPLAINED
If installed, this option limits field personnel to
basic breath testing tasks such as taking tests and
printing results.
Without a password, operators will not be able to
change any setting or calibrate/cal check the unit.
Note: Failure to remember your password will
require that the FC20 be sent back to Lifeloc to re-
initialize the password.
The FC20 has extended features that can be or-
dered from the factory. These are not standard on
the unit but only available as a special order items.
The available factory options include Password
Protection, Auto Air Blank and Automatic Altitude
Compensation for use with dry gas standards.
Contact Lifeloc Technologies for further information
on FC20 factory options.
FACTORY OPTIONS EXPLAINED
Page 32
User Settings-Factory Options
PASSWORD PROTECTION EXPLAINED
If installed, this option limits field personnel to
basic breath testing tasks such as taking tests and
printing results.
Without a password, operators will not be able to
change any setting or calibrate/cal check the unit.
Note: Failure to remember your password will
require that the FC20 be sent back to Lifeloc to re-
initialize the password.
The FC20 has extended features that can be or-
dered from the factory. These are not standard on
the unit but only available as a special order items.
The available factory options include Password
Protection, Auto Air Blank and Automatic Altitude
Compensation for use with dry gas standards.
Contact Lifeloc Technologies for further information
on FC20 factory options.
FACTORY OPTIONS EXPLAINED