Lifeloc FC20 - Display Contrast; Test Order Sequence

Page 29
User Settings
8. DISPLAY CONTRAST
From the “Display Settings” screen press the Exe-
cute button.
Press the Function button until the display reads
“LCD Contrast”.
Press the + or- buttons to set the contrast to the
desired level.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
8. TEST ORDER SEQUENCE
From the “Display Settings” screen, press the Exe-
cute button.
Press the Function button until the display reads
“Test Order”.
Press the Execute button to choose between “Auto”
or “Passive” testing as the default when you turn
the unit on.
Press the Function button to move to the next set-
ting or repeatedly until the display reads Exit.
Press the Execute button to save the changes and
return to the testing mode.
Test Order 1 Test Order 2
Auto Test (Default) Passive Test (Default)
Manual Test Auto Test
Passive Test Manual Test
Page 29
User Settings
8. DISPLAY CONTRAST
From the “Display Settings” screen press the Exe-
cute button.
Press the Function button until the display reads
“LCD Contrast”.
Press the + or- buttons to set the contrast to the
desired level.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
8. TEST ORDER SEQUENCE
From the “Display Settings” screen, press the Exe-
cute button.
Press the Function button until the display reads
“Test Order”.
Press the Execute button to choose between “Auto”
or “Passive” testing as the default when you turn
the unit on.
Press the Function button to move to the next set-
ting or repeatedly until the display reads Exit.
Press the Execute button to save the changes and
return to the testing mode.
Test Order 1 Test Order 2
Auto Test (Default) Passive Test (Default)
Manual Test Auto Test
Passive Test Manual Test