Lifeloc FC20 - Print Format; Printer Selection; User Settings

Page 27
User Settings
7. PRINTER SELECTION
7. PRINT FORMAT
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Print Format”.
Press the Execute button to select “Long” or “Short”
printouts.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Printer selection allows you to select what device
your FC20 will communicate with.
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Printer”.
Press the Execute button to select between the Life-
loc “AP890” printer, “DataTrak” computer based
download software or “Other” printer.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Page 27
User Settings
7. PRINTER SELECTION
7. PRINT FORMAT
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Print Format”.
Press the Execute button to select “Long” or “Short”
printouts.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.
Printer selection allows you to select what device
your FC20 will communicate with.
From the “Print Settings” display, press the Execute
button.
Press the Function button until the display reads
“Printer”.
Press the Execute button to select between the Life-
loc “AP890” printer, “DataTrak” computer based
download software or “Other” printer.
Press the Function button to move to the next set-
ting or repeatedly until the display reads “Exit”.
Press the Execute button to save the changes and
return to the testing mode.