Lighting Controls Blue Box LT Series - To Add a Holiday List to a Schedule

THE BLUE BOX LT PROGRAMMING 77
LCDBBP03Sept08
trigger (falls below) is 20. TAB DOWN to each
trigger and and SCROLL to adjust.
On Board Photocell
Reading: 0
Delay to off: 10Mins
Off when when light level
rises above: 40
Delay to On:5Mins
On when light level
falls below: 41
TAB DOWN to “off ”
trigger (raises above)
and SCROLL to adjust.
ON and OFF triggers
should remain at least
10 points apart.
TAB to ”on” trigger (falls below) and SCROLL 10.
to adjust.
On Board Photocell
Reading: 0
Delay to off: 10Mins
Off when when light level
rises above: 40
Delay to On:5Mins
On when light level
falls below: 41
Tip: A good way to determine the best trigger
settings is to do the above steps at a time when
daylight about matches when you want the lights
to go on or off. For example, set the Off (raises
above) trigger in the morning when the sun is
just coming up. Check the light level reading on
the clock when the area is bright enough for the
lights to shut off and use this reading as the “Off ”
value. Similarly, set the On (falls below) trigger in
the evening when it is just getting dark enough
so that the lights should come on. Check the
light level reading at that time and use it as your
“On” value.
EXIT and SAVE.11.
To add loads(relays) to this schedule, refer to 12.
“Adding Loads to a Schedule”. The PCELL
schedule is always programmed as MAINTAIN.
GROUP 1 MAINTAIN
EDIT: LCP-1 LOAD-5
LCP1:1,2,5
Use a MAINTAIN
group for
photosensor
settings.
TO ADD A HOLIDAY LIST TO A SCHEDULE
The system offers up to 2 separate editable Holiday
Lists. This portion of the menu allows you to select
from pre-existing holiday lists. See Edit/Create
Holiday List for instructions on how create or edit a
new Holiday List.
Every Day & Mon-Fri, Sat, Sun Schedule
These two schedules only allow the Holiday Lists to
be exempt from the schedule.
Follow this path: USER MENU › REVIEW 1.
SCHEDULE.
SCROLL to the correct page and then TAB to the 2.
SCHEDULE you wish to add a Holiday List to.
In the Schedule, TAB to EXCEPT NONE.3.
Except None
Except H1
Except H2
Except H1 + H2
SCH 1 EXCEPT NONE
EVERY DAY
ON TIME: 09:00 AM
OFF TIME: 05:00 PM
SCROLL to select the desired Holiday Exception.4.
Continue programming this schedule or Exit and 5.
Save.
Holiday List in “By Day” Schedule
This schedule allows one or both of the Holiday Lists
to be exempt, or even a new schedule created just
for the days included in the Holiday List.
Follow this path: USER MENU › REVIEW 1.
SCHEDULE.
SCROLL to the correct page and then TAB to 2.
the SCHEDULE you wish to add a Holiday List.
ENTER each
Holiday List to
edit the Holiday
Options
SCH 1
BY DAY H1 H2
Mo Tu We Th Fr Sa Su
ON TIME: 09:00:00a
OFF TIME: 05:00:00p
from Jan 1 to Dec 31