Lippert Components ground control TT - System Setup and Components

3
lci1.com 574-537-8900 Rev: 03.02.21
Ground Control
®
TT
Leveling OneControl
®
Touch Panel (3K-5K)
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002700
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
PERSONAL INJURY AND/OR PRODUCT OR PROPERTY
DAMAGE IF NOT SAFELY ADHERED TO AND WITHIN
THE PARAMETERS SET FORTH IN THIS MANUAL
ALWAYS WEAR EYE PROTECTION WHEN
PERFORMING SERVICE OR MAINTENANCE TO THE
UNIT. OTHER SAFETY EQUIPMENT TO CONSIDER
WOULD BE HEARING PROTECTION, GLOVES AND
POSSIBLY A FULL FACE SHIELD, DEPENDING ON
THE NATURE OF THE SERVICE.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
Resources Required
• 1 - 2 persons, depending
on task
• Cordless or electric drill
or screw gun
• Appropriate drive bits
• 5/16” drill bit
• 7/16” drill bit
• Ratchet
• 9/16” deep well socket
• ½” socket
• 5/8” socket
•
9/16” open end wrench
• ½” wrench
• 5/8” wrench
• ¾” wrench (optional)
• String
• Silver or white paint or
permanent marker
• Clamps
• Hydraulic floor jack
(optional)