Lite-On Technology Corp.
Industrial Automation
88
Display for Status Monitoring Register 1
Display for Status Monitoring Register 2
Display for Status Monitoring Register 3
Display for Status Monitoring Register 4
Display for Status Monitoring Register 5
The display for the error status of the
drive
Display for the status of the drive
The analog output monitoring
The selection for the content of the
display for Status Monitoring Register 1
The selection for the content of the
display for Status Monitoring Register 2
The selection for the content of the
display for Status Monitoring Register 3
The selection for the content of the
display for Status Monitoring Register 4
The selection for the content of the
display for Status Monitoring Register 5
The ratio for MON1 analog monitoring
output
The ratio for MON2 analog monitoring
output
The jog control of the servo motor
The status and setting of the digital output
The status and setting of the digital input
Record of the Abnormal Status (N)
The record of the abnormal condition (N-
1)
The record of the abnormal condition (N-
2)
The record of the abnormal condition (N-
3)
The record of the abnormal condition (N-
4)
The setting for the polarity of the pulse
output for the detector
The status monitoring register (for PC
software)
The content selection of the status
monitoring register (for PC software)
The function of the motor stop mode
The level for the detection of the target
rotation speed