LMI Selcom SLS 5000 - Appendixes; Appendix A, Revision Page; Appendix B, Accessories; Appendix C, SLS-Asynch-1, Protocol

03-09-05 40
7 Appendixes
Appendix A, Revision page
Revision Date Page Description
P9.2 00-05-09 Front page
Appendix
E
SLS2400 changed to SLS2401
Non-Volatile Memory information added.
P9.3 01-01-09 Section 7 Start up current corrected. Figure added
for Selcom synchronous.
P9.4 01-01-31 Appendix
B
Changed to meet the visible red laser
P9.5 03-09-05 Section 3
and
Appendix
sections
Laser safety updated section updated.
Appendix B, Accessories
LMI Technologies can supply the following accessories:
• Additional cables
• Heat protected cables
• Air purge adapter
• Power supply
• Heat shield (temperatures < 750 °C)
Appendix C, SLS-asynch-1, protocol
General information
Baud rate 9600 baud (RS-232)
38400 baud (RS-422)
Character
length
8 LSBs
Parity None
Start LSBs 1 LSB
Stop LSBs 1 LSB
HW handshake None
SW handshake XON/XOFF (RS-232, ASCII reply mode only)
Max update 50 Hz (RS-232, ASCII reply mode)