PUBLICATION INDEX
The Publication Index contains a list of publications dealing with plasma arc cutting equipment safety
practices.
1. American National Standards Institute, 1430 Broadway, New York, NY 10018
(212) 354-3300.
ANSI Standard Z41.1, Standard for Men's Safety-Toe Footwear
ANSI Standard Z49.2, Fire Prevention in the Use of Cutting and Welding Processes
ANSI Standard Z88.2, Practices for Respiratory Protections
ANSI Standard Z87.1, Safe Practices for Occupation and Educational Eye and Face
Protection
2. American Welding Society, 550 LeJeune Road, P.O. Box 351020, Miami, FL 33135
(305) 443-9353.
ANSI Standard Z49.1, Safety in Welding and Cutting
AWS Standard A6.0, Welding and Cutting Containers Which Have Held Combustibles
AWS Standard F4.1, Recommended Safe Practices for the Preparation for Welding
and Cutting of Containers and Piping that Have Held Hazardous Substances
3. National Fire Protection Association, 470 Atlantic Avenue, Boston, MA 02210
(617) 770-3000.
NFPA Standard 51, Oxygen - Fuel Gas Systems for Welding and Cutting
NFPA Standard 70-1978, National Electrical Code
NFPA Standard 51B, Cutting and Welding Processes
4. Superintendent of Documents, U.S. Government Printing Office, North Capitol
Street, Washington, D.C. 20402 (202) 783-3238.
NIOSH, Safety and Health in Arc Welding and Gas Welding and Cutting
OSHA, Safety and Health Standards, 29FR 1910
5. Canadian Standards Association Standard Sales, 178 Rexdale Boulevard, Rexdale,
Ontario M9W 1R3, Canada (416) 747-4000.
CSA Standard W117.2, Code for Safety in Welding and Cutting
Canadian Electrical Code Part 1, Safety Standards for Electrical Installations
6. Compressed Gas Association, 1235 Jefferson Highway, Arlington, VA 22202
(703) 979-0900.
CGA Pamphlet P-1, Safe Handling of Compressed Gases in Cylinders
7. National Welding Supply Association, 1900 Arch Street, Philadelphia, PA 19103
(215) 564-3484.
NWSA booklet, Welding Safety Bibliography
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com
To Next Page
Loading...
