Lockformer Vulcan 2900 - Section 2: Operation and Procedures; Loading the table with material; Control Power-On Procedure; Initial Torch;Head Set-Up Procedure

SECTION 2
OPERATION AND PROCEDURES
1. Loading the table with material
2. Control Power-On Procedure
3. Initial Torch/Head Set-Up Procedure
4. Emergency Stop
5. Plasma Unit Set-Up
6. Job Download
7. Exhaust Activation
8. Dry Run
9. Operation of Control During Cutting
10. Releasing a Job to Start a New Job
11. Lost Cut Recovery
12. Vulcan Download Quick Chart
13. Manual Data Input
14. Shape Library
15. Vulcan Operation Flow Chart
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com