IMPORTANT!
REMOVE THE STEEL ANGLE BRACKETS (YELLOW) SHOWN IN
THE PHOTOS BELOW BEFORE ATTEMPTING TO OPERATE
YOUR VULCAN MACHINE. THESE ITEMS WERE USED TO
SECURE THE MACHINE DURING SHIPPING.
REPLACE THE TWO SOCKET HEAD CAP SCREWS SECURING THE
BRACKETS ON THE CARRIAGE WITH THE SHCS IN THE BAG
ATTACHED TO THE TORCH HEAD (ALLEN WRENCH INCLUDED).
REMOVE THESE BRACKETS
SHIPPING BRACKET REMOVAL
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com
To Next Page
Loading...
