Lode BV Excalibur Sport
18
3 Installing the Excalibur Sport ergometer
This chapter describes:
! What should be in the Excalibur Sport package
! Options.
! Instructions for installation.
! Connecting the BP cuff.
! Connecting the Heart rate system.
3.1 What should be in the Excalibur Sport package
Before installing the Excalibur Sport ergometer, check that the following items are included
in the package:
• User guide part. no. 925900UE
• power cord part. no. 212010
• calibration rapport
• control unit
• cable control unit – Excalibur Sport
3.2 Options
Your purchase order should mention whether options have been installed in your ergometer.
Contact your dealer if one or more of the above items is missing.
! RPM set part. no. 928201
The RPM set is an option. For the Imaging Tables with Excalibur Sport and the Excalibur
Sport this option is standard supplied.
! Programmable Display (P) Option part. no. 928811
The programmable Display is an option with the Excalibur Sport. It should be installed by
service personnel only. It offers program and protocol possibilities for workload (step, ramp),
heart rate, torque and blood pressure (when option B 928818is also ordered). Readout is done
by a 4x20 characters LCD display with backlight. For operation four extra keys are available.
! Programmable Display + SpO2 + HR (SpO
2
) Option part. no. 928841
The SpO
2
is an option with the Excalibur Sport. It should be installed by service personnel
only. It offers all features of the P Option. The SpO2 module measures functional oxygen
saturation of arterial hemoglobin (%SpO2) and pulse rate (HR) for adult and pediatric
patients. The Module can be used with several sensors: adult Articulated Finger Clip Sensor,
Pediatric Finger Clip Sensor, Ear Clip Sensor, Reflectance Sensor, Adult Flex Sensor, Infant
Flex Sensor or a Disposable Sensors Assortment Pack including 4 adult, 2 pediatric, 2 infant,
and 2 neonate.
To Next Page
Loading...
