Lode BV Excalibur Sport
48
ANALOG
P = 0W 0 rpm
♥ = 0/m
esc esc
TERMINAL
P = 0W 0 rpm
♥ = 0/m
esc esc
MANUAL
P = 0W 0 rpm
♥ = 0/m
esc P 0Watt
when BP option is available. For BP the same holds for the ANALOG and TERMINAL
menu.
With the ▼▲ keys you can increase or decrease the workload. In the middle the adjustable
parameter is shown, f.i. the load P.
or
when the 0-Watt Start-up System is available. For this option the same holds for the
ANALOG and TERMINAL menu.
With the ▼▲ keys you can increase or decrease the workload. In the middle the adjustable
parameter is shown, f.i. the load P.
B.3.4 Analog menu
Selecting the ANALOG menu will show the following screen at the programmable panel:
The ergometer is now ready for external control with an analog signal as previously
described. See for more information about analog control the standard user guide supplied
with the ergometer.
B.3.5 Terminal menu
Selecting the TERMINAL menu will show the following screen at the programmable panel:
The ergometer is now ready for digital external control.
To Next Page
Loading...
