Lode 925900 - Specifications; 7.1 Technical Specifications; 7.2 Fuses; 7.3 Dimensions

Lode BV Excalibur Sport
35
7 Specifications
7.1 Technical Specifications
Principle : eddy current brake small disk • 430mm.
Mains voltage : 115-230 VAC (adjustable).
Frequency : 50 Hz, 60 Hz.
Patient capacity : 180 kg - 396 lb.
Power consumption : 120 VA.
Workload : 8 – 1500 W continuous HYP, 2500 W peak.
8 – 1500 W continuous LIN, 2500 W peak.
Moment of inertia at crank axis : 24 kgm
2
± 5%
Maximum Torque : 200 Nm
Device control : manual, external analog, external digital.
Accuracy : P< 100 W ±2 W / 100 W < P < 1500 W: ± 2%.; P
> 1500 W: ± 5%. According to PTB DIN 13405.
Read-out workload : digital, 0-2500, resolution 1 W.
Read-out pedaling speed : analog 0 -180 rpm or digital 0-255 rpm..
Read-out sitting position : on display
Output workload : 100, 200 or 500 W ≙ 1 V (max. 2500 W)
Output pedaling speed : 100 rpm ≙ 1 V.
Input voltage for external control : 100, 200 or 500 W ≙ 1 V (max. 2500 W)
Safety class Excalibur Sport + P : I type B, IEC 601-1 chapter 18, 19 and 20.
Safety class Excalibur Sport + B : IIa type B, IEC 601-1 chapter 18, 19 and 20.
Leakage current : < 0.4 mA.
Isolation resistance : > 4 MΩ.
Earthway resistance : < 0.2 Ω.
Zero load : < 8 W at 60 rpm
Noise level : +/- 70 dB at workload 200 W/60 rpm +/-80 cm from
crank.
7.2 Fuses
115 V : 2 x 1,60 A slow.
230 V : 2 x 0,80 A slow.
7.3 Dimensions
Length : 130 cm.
Width : 70 cm.
Height : 89 cm.