Lode BV Excalibur Sport
32
6.5.5 TC Bytes
The Test code (TC) Bytes offers, in case of malfunction or poor performance of the BP option
(App. D), the possibility to make error codes visible. The interpretation of the error codes
should be done only by experts. Ask your supplier for more information.
Setting the TC bytes to ON gives you an extra display possibility to scroll through after the
blood pressure measurement. Restart of the ergometer sets TC bytes automatically OFF.
6.5.6 RS232 Protocol
When the ergometer is externally controlled via RS232 a protocol should be select here.
The following protocols are currently available:
1. LODE protocol
2. LODE prot 38k4
3. BOSCH EKG 506
4. LODE WLP
5. ERGOLINE P10
6. ERGOLINE P4
7. SCHILLER
Check in Appendix E which protocol and cables should be used with your device. When your
device is not listed please contact your supplier!
6.5.7 Language
You can choose different languages for the ergometer.
Currently English, German, French, Spanish and Dutch are available. The default setting is
English.
6.5.8 Device No
When RS232 communication is used with the ergometer, it is identified with a so called
device number. This offers the possibility of looping through ergometers. Each ergometer
should have its unique device no in that case. The ergometer respond only to RS232
commands proceeded with their unique device number or with zero. The response of the
ergometer is also preceded with its device no.
SETTINGS
TC BYTES
SETTINGS
RS232 PROTOCOL
SETTINGS
LANGUAGE
To Next Page
Loading...
