Lode BV Excalibur Sport
25
seconds before this workload is achieved. This holds also for workload reduction. Only when
RPM drops below 25, the workload is removed at once, because the pedal torque becomes
very high. Workload is put on the brake when RPM is more than, or equal to 30 RPM.
Example of only workload readout in manual mode:
6.1.2 RPM
Switch ON or OFF the cadence readout in revolutions per minute. The RPM can always be
readout by the LED bar graph on top of the display independent of this adjustment.
Example of RPM and workload readout in manual mode:
6.1.3 Heart rate
Switch ON or OFF the Heart rate indication in beats per minute. The ♥ symbol is used in the
display. Be sure the heart rate is available either from the option 928826 or from an external
source (i.e. ECG device via the analog I/O port).
Example of RPM, workload and heart rate readout in manual mode; you will now see the
three subsequent screens below scrolling every 5 seconds to display the 3 parameters.
RPM
On
HEART RATE
Off
P= 100W
P MANUAL
P= 100W 60 rpm
P MANUAL
P= 100W 60 rpm
P MANUAL
60 rpm ♥= 80/m
P MANUAL
♥= 80/m P= 100W
P MANUAL
To Next Page
Loading...
