Lode BV Excalibur Sport
22
SYSTEM PARAMETER
SETTINGS
4. For a list of available protocols and ECG devices see App E. You can set the
TERMINAL as a default start-up menu, when your ergometer is always controlled by
an ECG device in the TERMINAL MODE, – see 6.4.1 Default
5. The Excalibur Sport is now ready for digital external control. If you intend to use
blood pressure as well, take care of the following:
o It is strongly advised to read Appendix D before starting with BP on your
ergometer.
During cycling, the display of the control panel shows the same information as described in
manual control (see 4.1). Another option to control the ergometer from a PC is with the Lode
Ergometry Manager (LEM, article 92890x) software. This uses the Lode 38k4 protocol.
SETTINGS
RS232 PROTOCOL
To Next Page
Loading...
