Logic DLC NET Series

USE AND MAINTENANCE MANUAL – DLC
NET
Series
Use as a batcher
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
Page 68 of 78
To set pre-actions for each ingredient:
 From the main weight display screen, press the button to enter the
top-level menu.
 Use the button to scroll through the menu items to the section
.
 Press to enter the menu.
 Press at any time to cancel and return to the previous menu.
 The display will show as a first option, equal to the queue for the
ingredient 1. Press to scroll to up to the first of the operations (
).
 Press to choose the pre-actions to edit.
 When it choose, press to confirm and start to edit.
 Entering the edit menu of the single pre-actions, the display will show
with the first digit flashing.
 Use the button to increase the digit and to switch to editing
the next one.
 After changing the parameter, press .
 At this point the instrument will show and the procedure is
finished.