WORK SITE
WARNING!
Never operate a band sawmill with a petrol-powered engine in enclosed or poorly ventilated
areas. This can result in death due to suffocation or carbon monoxide poisoning.
IMPORTANT
Only operate the band sawmill and handle band blades in full daylight or under adequate
lighting.
IMPORTANT
Keep the work area free from clutter, pets, children, obstacles or other things that can distract
the operator.
IMPORTANT
Choose a worksite where the ground is hardpacked and level, with plenty of space for the band
sawmill, a pile of logs and sawn timber. If possible, place the band sawmill so that the sawdust
blows away from the operator. Set up the band sawmill on level ground with at least 5 m of
free space without any obstacles around the equipment. If the band sawmill is to be set up
permanently, we recommend that you support the rail frame with concrete plinths or wooden
blocks (15 cm x 15 cm) under each cross bunk.
IMPORTANT
Always keep a hand-held, ABC type (min. 6 kg) re extinguisher readily accessible at the
worksite.
IMPORTANT
Always keep a fully-stocked rst-aid kit easily accessible at the worksite.
USER MANUAL
10
To Next Page
Loading...
