SAFETY INSTRUCTIONS
KEY TO SYMBOLS
WARNING!
This symbol means that y
ou should pay particular attention and is always followed by
information about the relevant risk.
IMPORTANT
This symbol is foll
owed by important information or instructions. Pay particular attention when
this symbol appears in the manual text.
For your own safety and the safety
of others, d
o not operate the band
sawmill or handle band blades without
rst having read and understood all
the contents of this user manual.
Always use cl
ose-tting safety goggles
when working with the machine
or handling bandsaw blades. Under
certain circumstances the use of a
protective mask may also be advisable.
This would primarily apply if you are
sawing dry wood or sawing indoors.
WARNING! Cutting t
ools: Incorrect
use of the machine can lead to life-
threatening injuries. Bandsaw blades
are extremely sharp and dangerous.
Always use approved hearing
prot
ection when working with the
machine. Even brief exposure to high
frequency noise can damage your
hearing.
Always wear full-length protective
trousers when working with the
machine or handling band bl
ades.
Never wear loose-tting clothing,
scarves, neck chains, etc. that can get
caught in the machine when working.
Secure loose hair before working with
the Band sawmill.
Always wear protective gloves (class
1) when tting and working with the
band sawmill or handling bandsaw
bl
ades. Risk of lacerations when
handling bandsaw blades and some
sheet metal. Bandsaw blades and
motor parts can be hot after sawing.
Always wear approved protective
foot
wear with saw protection, steel
toe-caps and nonslip soles when
working with the machine or handling
bandsaw blades.
This symbol describes the direction of
the saw head. The symbol is critical t
o
the assembly and will return during the
montage.
When this symbol appears during the
assembly
, parts must be lubricated
beforehand mounting. Lubricate
affected parts with universal grease.
This symbol shows that there is a
helpful tip nearby!
USER MANUAL
8
To Next Page
Loading...
