EVERY TIME BEFORE OPERATING THE BAND SAWMILL:
Ensure that
• the customer is wearing the prescribed personal protective equipment
• the prescribed maintenance procedures have been properly carried out
• the band blade is not moving when the engine is idling
• the machine stands rmly and securely and the rails are supported along their full length
• the anti-tip wheels of the carriage and the rail end stops are properly installed
• everything on the band sawmill is properly and securely installed and in good working order
• all safety features on the band sawmill are properly and securely installed and in good working order
• the band blade is correctly installed, and that it rotates freely and in the right direction.
BEFORE EACH CUT:
Ensure that
• no other persons than the operator and no pets are within the danger area of the machine
• the worksite is free of objects that can pose a tripping hazard or distract the operator
• the band blade runs clear of the log supports and log clamps
• the rails are free of debris, dirt, etc
• the log is rmly secured
• the adjustable blade guard has been correctly adjusted to manage the maximum width of the log
WHEN OPERATING THE BAND SAWMILL:
WARNING!
Risk of burn injury. The engine and its mufer get very hot during operation and remain hot
after the engine has stopped.
WARNING!
Risk of re! Petrol and petrol vapours are extremely ammable. Be aware of the re, explosion
and inhalation risks involved.
CAUTION
The engine must be turned off and have been allowed to cool for 10 minutes before refueling.
CAUTION
Always turn the engine off when you are leaving the operating station, even just temporarily,
e.g. to take care of sawn timber or do maintenance.
USER MANUAL
93
To Next Page
Loading...
