Logosol B1651 - Starting and Stopping

STARTING AND STOPPING
The Pro Set and the Pro Feed are two units used to control the sawmill. The Pro Set handles the vertical
movement of the saw head and allows you to set the thickness of the board. The Pro Feed handles the
movement of the carriage and the speed of the saw blade.
You can nd a more indepth description of how to use the Pro set and Pro feed in the ProSet
ComputerSetworks Manual and ProFeed 400V Manualon the Logosol website.
How To Start
1. Turn the switch on the electrical cabinet to the "ON" position.
2. Adjust the height of the saw head.
3. Press and hold the constant contact control.
4. Start the motors.
5. Adjust the speed of the saw blade.
6. Move the saw head and carriage forward to start sawing.
0
1 00
How To Stop
1. The bandsaw blade will slow down and stop when you release the constant contact control.
2. Turn the switch on the electrical cabinet to the "OFF" position.
USER MANUAL
86