USING THE BAND SAWMILL
OPERATING THE BAND SAWMILL
WARNING!
Cutting tools: Always stand behind the saw carriage and keep both your hands on the handles
while operating the machine. Never stand in front of the carriage or band blade. Never pull the
carriage through the cut.
WARNING!
Risk of crush injury. Rotating parts: Even a slight force applied to the release mechanism of
the sawhead can cause the sawhead to drop uncontrollably and make the crank rotate rapidly,
which can cause serious injury.
WARNING!
Never modify this machine in such a way that it no longer corresponds with the original design.
Do not use it if it has been modied. Never use other attachments/ accessories than those
recommended in this user manual.
WARNING!
A broken band blade can be ejected out of the sawdust chute at high velocity.
CAUTION
During operation, make sure that nobody is on the side of the band sawmill where the sawdust
chute is located. The risk of a blade breaking increases if it is not correctly installed or
maintained.
CAUTION
The band blades and plastic parts of the sawmill are cold-resistant down to -25°C. Do not
operate the band sawmill in colder temperatures than -25°C.
USER MANUAL
89
To Next Page
Loading...
