LOG WEDGE
The sawmill comes with four log wedges which help prevent bigger logs from rolling off the sawmill. Adjusting
the distance between the wedges allows different size logs to be used.
Here's how to use them: Attach two wedges to crossbunk 2 and 4 counted from the saw head, on the opposite
side of your log table. Roll the log from the log table onto the saw mill and position the last two wedges on the
other side of the log. You can hit the wedge with a mallet to secure it further under the log before tightening
the wheels.
USER MANUAL
88
To Next Page
Loading...
