MOVING THE BAND SAWMILL
WARNING!
Risk of crush injuries.
CAUTION
Keep people and pets outside the 5 m danger area around the machine while lifting and
moving the machine parts. Secure the load during transport.
NOTICE
The saw carriage and the rails/bed must not be lifted or transported when assembled together,
but must be transported separately as two parts.
Lifting the saw carriage: Disconnect the carriage’s anti-tip wheels, one on each side, and lift the carriage with
the help of reliable lifting gear afxed to the lift rings located at the top of the carriage. Weight: 350 kg.
Lifting the rails/bed: Use a hand pallet truck or a forklift truck and lift under the rails. Place a protective layer
of wood on the forks before lifting. Ensure that the rails are well balanced and secure the load to the lift forks
before transport. Weight: 500 kg.
USER MANUAL
96
To Next Page
Loading...
