Lorex LH150 ECO4 SERIES - Connecting and Removing BNC Cables

Basic Setup (LH150 Series)
6
6.11.3 Connecting and Removing BNC Cables
BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connec-
tor clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the con-
nector counter-clockwise to loosen the BNC connector.
#LX400012; r. 2.0/12066/12066; en-US
16