Backup13
13.2 Using Video Clip Backup
Video clip backup allows you to select a duration of video during playback mode and save
it to a USB flash drive (not included).
Note
Video clip backup is only available when a single channel is selected for playback.
To create a backup video clip:
1. Connect a USB flash drive (not included) to one of the USB ports on the DVR.
2. Open Playback Mode with only one channel selected. For details, see 12.1 Playing
Back Recorded Video, page 29.
3. Click the clip backup button (
) to start your backup at the current playback time.
Click to select the start and stop times.
4. When you want the backup clip to stop, click again.
Note
You can use fast forward or click-and-drag the video cursor to select the stop time for the clip. This is
useful because it allows you to backup longer segments of video without having to watch the whole
video each time. You must have enough space on your USB flash drive to save the file.
5. A confirmation window appears, showing information about the backup file you are
about to create. Click Backup to confirm. Wait for the file to be saved.
13.3 Viewing Backed Up Video
To view the downloaded video, you must install the Lorex Player software.
• For PC instructions, see 19 Lorex Player 11: Playing Backed up Video on PC, page 129.
• For Mac instructions, see 20 Lorex Player for Mac: Viewing Backed up Video on Mac,
page 133.
#LX400012; r. 2.0/12066/12066; en-US
35
To Next Page
Loading...
