Remote Control
8
1. REC: Press to resume recording after recording has been stopped.
• SEARCH: Press to open the Search menu.
• Number keys (1-0): In Live Viewing Mode, press to open the desired channel in
Full-screen view. Press 1+0 for channel 10, 1+1 for channel 11, etc.
• 0: Press 0 three times to show the mouse cursor on the BNC monitor or the monitor
connected with HDMI/VGA.
• Display Mode: In Live Viewing Mode, press repeatedly to switch through split-
screen viewing modes.
• 2x2 / 3x3 / 4x4: In Live Viewing Mode, press to open the corresponding split-
screen view. Press repeatedly to change channels shown in split-screen.
• AUTO: Press to start/stop Sequence Mode.
2. Navigation cursors: Press to navigate menus.
• ENTER: In menus, press to confirm selections.
• In Live Viewing Mode, press to access System Information.
3. MENU/ESC: Press to open the system menu. In menus, press to go back/exit menu.
• MUTE: In Live Viewing and Playback Modes, press to mute/un-mute audio.
• PIP: In Live Viewing Mode, press once to open Picture in Picture (PIP) 1X1 or twice
to open PIP 1X2. Mouse is required to change channels shown in PIP.
4. Playback controls:
• FWD: In Playback Mode, press to fast forward/increase fast forward speed.
• REW: In Playback Mode, press to rewind/increase rewind speed.
• PLAY: In Playback Mode, press to play / pause video.
• In Live Viewing Mode, press to open the Record Search Menu.
• STOP: In Playback Mode, press to pause playback.
• In Live Viewing Mode, press to stop recording. Password required; does not
override scheduled recording.
• SLOW: In Playback Mode, press to play video in slow motion. Press repeatedly to
change slow motion playback speed.
• PAUSE/FRAME: In Playback Mode, press to pause. Press repeatedly to view re-
cordings frame by frame.
#LX400012; r. 2.0/12066/12066; en-US
20
To Next Page
Loading...
Need help?
General