Lorex LNR110 Series User Manual

Basic Setup (LNR110 Series)
6
5. Click Add. The Status indicator turns green to show the camera is successfully
connected.
6. Click OK to save changes.
NOTE
You can also add a camera to a specific channel by hovering the mouse over an empty channel in split-
screen view and clicking
. Then double-click the camera you would like to add and right click to exit.
#LX400070; r. 1.0/27147/27147; en-US
15

Lorex LNR110 Series Specifications

General

Brand	Lorex
Model	LNR110 Series
Category	Network Hardware
Language	English